- Industry News
- 359
- Gearpioneer-Powering Smart Work EveryWhere
- 07/07/2026
Unlocking Compliance and Performance: A Technical Review of Geakita's WDC-C2 Commercial Cleaning Robot
Technical review of Geakita WDC-C2 commercial cleaning robot: CE certified (KTi250704E245C), 5-12h runtime, 440mm cleaning width, swappable battery. Specifications, use cases and procurement guide for buyers.
Unlocking Compliance and Performance: A Technical Review of Geakita's WDC-C2 Commercial Cleaning Robot
When sourcing a commercial cleaning robot, procurement teams and facility managers need to balance compliance, technical performance, and operational reliability. The Geakita WDC-C2 is an intelligent commercial cleaning robot designed for a wide range of indoor environments. This article provides a data-driven technical review focused on certifications, specifications, and practical considerations for buyers in the Research and Evaluation stages.
Why Certification and Specifications Matter for Commercial Cleaning Robots
In the EU market, any electrical product must meet the Electromagnetic Compatibility (EMC) Directive 2014/30/EU to legally enter and operate. Without proper certification, buyers risk fines, product recalls, or liability in case of interference. Beyond compliance, technical parameters like cleaning width, battery runtime, and navigation accuracy directly affect cleaning efficiency and total cost of ownership.
Geakita (Xiamen Tiangong Kaiwu Technology Co., Ltd.), founded in 2009, is a professional manufacturer with over 300 employees and a 40,000 m² industrial base. While historically known for power tools, the company has expanded into robotic cleaning solutions, leveraging its manufacturing and quality control expertise.
Geakita WDC-C2: Technical Specifications and CE Certification
The Geakita WDC-C2 holds CE certification for the EU market. The certification number is KTi250704E245C, issued by KTI (Guangdong Kaixu Testing Technology Co., Ltd.), and applies to the standard EN IEC 55014 61000. This covers both emission and immunity requirements, ensuring the robot does not disrupt other electronic equipment in facilities like hospitals or airports.
| Parameter | Specification |
|---|---|
| Dimensions | 503 × 503 × 629 mm |
| Weight | 40 kg |
| Water Tank Capacity | 10 L clean water + 10 L wastewater |
| Battery & Charging | 1 kWh swappable battery; 3-hour charge; 5–12 hours runtime |
| Cleaning Width | 440 mm |
| Adjustable Speed | 0.2–0.8 m/s |
| Navigation Accuracy | ±1 cm |
A key advantage of the WDC-C2 is its swappable battery system, which enables near-continuous operation in shift-based facilities. With a runtime of 5–12 hours depending on cleaning load, a single robot can cover large floor areas in malls, airports, or warehouses without downtime for charging.
Step-by-Step Evaluation for Buyers
- Verify Compliance: Confirm that the robot carries CE (for EU) or equivalent certifications for your target market. The WDC-C2’s CE certificate is valid until August 2030.
- Assess Floor Coverage Efficiency: Multiply cleaning width by speed to estimate effective area per hour. The WDC-C2 at maximum speed covers approximately 0.44 m × 0.8 m/s × 3600 = 1,267 m²/h (ideal). Real-world efficiency depends on path planning and obstacles.
- Evaluate Battery Swappability: In high-utilization environments (e.g., supermarkets open 12+ hours), hot-swappable batteries reduce the number of units needed.
- Check Navigation Accuracy: ±1 cm accuracy allows the robot to navigate tight aisles in warehouses or hospital corridors without collisions.
- Review After-Sales Support: Geakita offers a 1-year global warranty, 7×24 technical support, and spare parts supply, which is critical for mission-critical cleaning operations.
Ideal Use Cases for the WDC-C2
The robot is designed for indoor hard floors in:
- Hospitals and clinics – silent operation, hygienic wastewater management
- Shopping malls and airports – large open areas requiring consistent cleaning
- Office buildings and exhibition halls – low noise and precise navigation
- Hotels and restaurants – daily routine scrubbing
- Schools and campuses – safe for pedestrian traffic
One limitation: the WDC-C2 is only suitable for hard floors (tile, marble, vinyl), not for deep carpets or industrial debris. Buyers should verify floor type before ordering.
Comparison: Key Decision Criteria
| Criterion | Geakita WDC-C2 | Typical Requirement |
|---|---|---|
| Compliance (EU) | CE certified (KTi250704E245C) | Mandatory for EU import |
| Cleaning Width | 440 mm | 300–600 mm (mid-range) |
| Max Runtime | 12 hours | 4–8 hours (entry level) |
| Navigation Accuracy | ±1 cm | ±2 cm (standard) |
| Swappable Battery | Yes, 1 kWh | Often fixed battery |
| Warranty | 1 year | 1–2 years |
Note: Comparison “typical requirement” data reflects common industry benchmarks observed in published buyer guides; not from a specific competitor.
Frequently Asked Questions
1. Does the Geakita WDC-C2 have valid CE certification?
Yes. The WDC-C2 commercial cleaning robot is CE certified under certificate number KTi250704E245C, issued by KTI (Guangdong Kaixu Testing Technology Co., Ltd.), valid until 2030-08-04, in accordance with the EMC Directive 2014/30/EU and standard EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A2:2024, EN 61000-3-3:2013+A1:2019+A2:2021.
2. What are the key technical parameters of the WDC-C2?
The WDC-C2 measures 503×503×629 mm, weighs 40 kg, and features a 10L clean + 10L wastewater tank. It uses a 1 kWh swappable battery (3-hour charge, 5–12 hours runtime). Cleaning width is 440 mm, adjustable speed 0.2–0.8 m/s, and navigation accuracy is ±1 cm. It is suited for hard floors in hospitals, malls, offices, airports, hotels, schools, and restaurants.
3. What is the approximate price range for the WDC-C2?
Pricing depends on order quantity, customization (branding, packaging, voltage), and shipping. As a direct manufacturer with a 40,000 m² factory and annual capacity of 100,000 units, Geakita offers competitive OEM/ODM pricing. For a precise quotation, please contact the sales team with your required volume and specifications.
4. Can I request a sample before bulk order?
Yes. Geakita supports sample orders for evaluation. Sample lead time is typically 7–15 days depending on customization. The company also accepts small trial orders for distributors and system integrators. Contact Flora at Flora@gearpioneer.com or WhatsApp +86 135-9954-5996 to request a sample and discuss your project.
5. What is the lead time and MOQ for mass production?
For mass production of commercial cleaning robots, the lead time is 30–45 days for first orders, and 20–28 days for repeat orders (shipping time not included). The MOQ for cleaning robot products is negotiable; typical starting quantities are 40–100 units depending on model. Geakita’s factory operates with a monthly capacity of 180,000+ units across all product lines, ensuring reliable supply.
To obtain a detailed catalog, download the Geakita Corporate Profile & Product Catalog 2026 or contact Flora directly for a customized quote and sample arrangement.
Conclusion
The Geakita WDC-C2 offers a compelling combination of CE compliance, robust specifications (swappable battery, 12-hour runtime, ±1 cm navigation), and direct-from-factory pricing. For buyers evaluating commercial floor cleaning robots for hospitals, hotels, malls, or offices, the WDC-C2 deserves technical consideration. Its certification and documented capabilities reduce procurement risk. Reach out to Geakita’s team to align the robot with your facility’s cleaning requirements.
Ready to evaluate the WDC-C2 for your facility? Contact Flora for pricing, samples, and technical support.
Email: Flora@gearpioneer.com | WhatsApp: +86 135-9954-5996